feat: switch browser-vpn-proxy to LoadBalancer on port 1080

Replace the NodePort (30889) with type: LoadBalancer on the standard
SOCKS5 port 1080, at the user's request for a more natural port than a
30000+ NodePort value. loadBalancerIP: 10.10.40.20 (nik-debian) matches
values/gitea.yaml's gitea-ssh Service pattern exactly.

Documented the actual behavior after checking, not assuming: k3s's
ServiceLB (Klipper) binds the port on every node via a DaemonSet by
default - loadBalancerIP only sets the reported external IP, it
doesn't scope which nodes bind the port. That needs a separate
enablelb/lbpool node-label mechanism this repo doesn't use anywhere
yet (including on the existing gitea-ssh Service, which likely has the
same characteristic, unnoticed until now). So this change doesn't
narrow exposure to nik-debian only - it's still reachable at any node
IP on port 1080, the same multi-node reachability the NodePort version
already had, just a different port number.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

manifests/multus/30-browser-vpn-proxy.yaml

@@ -23,13 +23,10 @@
 # already used for the DaemonSet, NAD, and canary, not a new mechanism.
 #
 # Before applying:
-#   1. Verify the NodePort below (30889) doesn't collide with anything
+#   1. Verify port 1080 below doesn't collide with anything live —
-#      live — confirmed free 2026-08-24 (`kubectl get svc -A`, checked
+#      confirmed free 2026-08-24 (`kubectl get svc -A`, checked against
-#      against every NodePort in use). manifests/media/gluetun-proxy.yaml
+#      every live LoadBalancer Service's ports: gitea-ssh uses 2222,
-#      (the existing browser proxy this replaces) uses 30888, not this
+#      traefik uses 80/443).
-#      one — no collision, but that file stays live and unmodified until
-#      this replacement is confirmed working end to end, then gets
-#      decommissioned as its own separate, explicitly-approved step.
 #
 # Design:
 #   - serjs/go-socks5-proxy (github.com/serjs/socks5-server) — a small,
@@ -47,7 +44,7 @@
 #     not an oversight. plan.md originally called for auth AND
 #     LAN-restriction together as a floor; discussed and explicitly
 #     relaxed (2026-08-24) after confirming the home network's own
-#     firewall already restricts this Service's NodePort to Trusted
+#     firewall already restricts this Service's port to Trusted
 #     (VLAN 10) and Lab (VLAN 40) only — Trusted/Lab → Lab is ALLOW,
 #     IoT/Guest/Management → Lab is DENY except the Technitium DNS
 #     exception (see ~/repo/home-network/Home Network Implementation
@@ -71,13 +68,29 @@
 #     LAN. Access restriction is the OpenWrt firewall alone; there is no
 #     compensating netns-level (nft) inbound filter here either — one
 #     could be added later, but would first need confirming whether this
-#     NodePort Service actually preserves real client source IPs
+#     Service actually preserves real client source IPs end-to-end
-#     end-to-end (default `externalTrafficPolicy: Cluster` typically
+#     (default `externalTrafficPolicy: Cluster` typically does not —
-#     does not) rather than assuming it does.
+#     this Service doesn't set `externalTrafficPolicy: Local` either,
-#   - Service is NodePort, not LoadBalancer/Ingress — reachable from the
+#     unlike values/traefik.yaml's LoadBalancer, which does specifically
-#     LAN at <any node IP>:30889, never exposed publicly (no port-forward
+#     for this reason) rather than assuming it does.
-#     on Flint/the router for it, same as the now-decommissioned
+#   - Service is LoadBalancer (k3s's built-in ServiceLB/Klipper), port
-#     gluetun-proxy was).
+#     1080 directly — not NodePort, at the user's request for a more
+#     natural port than a 30000+ NodePort value. `loadBalancerIP:
+#     10.10.40.20` (nik-debian) matches values/gitea.yaml's gitea-ssh
+#     Service pattern exactly (`loadBalancerIP: 10.10.40.53`, minisforum)
+#     — confirmed by reading how Klipper actually works before adding
+#     this, not assumed: `loadBalancerIP` only sets the *reported*
+#     external IP (`.status.loadBalancer.ingress[].ip`); the underlying
+#     svclb DaemonSet still binds port 1080 on every node by default,
+#     same as gitea-ssh's `loadBalancerIP` pin does today. Actually
+#     scoping it to nik-debian only needs k3s's separate
+#     `svccontroller.k3s.cattle.io/enablelb`/`lbpool` node-label
+#     mechanism, which nothing in this repo uses yet — not added here,
+#     so this is reachable at <any node IP>:1080, functionally identical
+#     multi-node reachability to the NodePort version it replaced, just
+#     a different (and more memorable) port number. Never exposed
+#     publicly either way (no port-forward on Flint/the router for it,
+#     same as the now-decommissioned gluetun-proxy was).
 #
 # Browser configuration — this is the part that actually matters for
 # "DNS must be resolved through the proxy": configuring a SOCKS5 proxy
@@ -191,9 +204,12 @@ metadata:
 spec:
   selector:
     app: browser-vpn-proxy
-  type: NodePort
+  type: LoadBalancer
+  # Pinned to nik-debian's own address, matching values/gitea.yaml's
+  # gitea-ssh Service (loadBalancerIP: 10.10.40.53, minisforum) — see the
+  # header comment for what this does and does not actually restrict.
+  loadBalancerIP: "10.10.40.20"
   ports:
     - name: socks5
       port: 1080
       targetPort: 1080
-      nodePort: 30889 # verify unused before applying — see header